Tag Archives: Additive Manufacturing

Modular simulation of neuroangiography and endovascular interventions in neuroradiology

H. Schwenke et al. Modular simulation of neuroangiography and endovascular interventions in neuroradiology Additive Manufacturing Meets Medicine. Publication Date September 8, 2021 How Analyze was Used “Segmentation of arteries was performed using AnalyzePro 1.0 (AnalyzeDirect, Overland Park, Kansas, USA), while a semi-automated approach using a region growth algorithm was applied. For this purpose, seed areas…

Comparing Technologies of Additive Manufacturing for the Development of Vascular Models

Johanna Spallek1, Andreas Frölich2, Jan-Hendrik Buhk2, Jens Fiehler2, Dieter Krause1. Comparing Technologies of Additive Manufacturing for the Development of Vascular Models. Fraunhofer Direct Digital Manufacturing Conference 2016. Full Text – Open Access Publication Date March 2016 How Analyze was Used “The images were reconstructed using a soft-tissue kernel with an isotropic voxel size (edge length…

Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials

Yavari SA, Ahmadi S, Pouran B, Schrooten J, Weinans H, Zadpoor A. Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials. J Mech Behav Biomed Mater. December 2014. Publication Date December 2014 How Analyze was Used “The reconstructed images were then transferred to Caliper Analyze 11.0 … to…