Jose L. Sanchez Noriega et al. Spatially and optically tailored 3D printing for highly miniaturized and integrated microfluidics Nature Communications.
September 17, 2021
How Analyze was Used
“Chips were then scanned using a QuantumGX2 μCT scanner (PerkinElmer, Waltham, MA) at the following settings: 4 min High resolution, Al 0.5 mm + Cu 0.06 mm filter, 36 mm FOV, 90 kV, 88 μA. After initial scan images were reconstructed to a final voxel size of 25 μm and 9 μm. 3D images were then reconstructed as a Maximum Intensity Projection using Caliper Analyze 12.0 (AnalyzeDirect, Inc., Overland Park, KS).”
Electrical and electronic engineering, Lab-on-a-chip, 3D printing, Microfluidics
Brigham Young University, Provo, Utah, USA